|
Product Details:
|
| Quantity Of LEDS: | 80 | Illumination (10 Steps Adjustable): | ≥160,000Lux |
|---|---|---|---|
| Color Rendering Index: | Ra>95 | Color Temperature: | 3500±300K,4000±300K, 4500±300K,5000±300K |
| Depth Of Illumination (mm): | 1000 | Spot Diameter: | 120-250mm |
| LED Life: | >50,000 Hours | The Model Of LED: | OSRAM GWCS8PM1.CM |
| UPS: | Available | Color Reduction Index(Ra): | 96 ,R9 97, R13.98 |
| High Light: | led examination lamp,medical lighting equipment |
||
wall mounted medical surgery theatre surgical led operation light
Discription:
Uniform,homogeneous lighting in surface and deep cavity procedures thanks to L4W-LED´s innovative shadow control.Our ergonomic, sterile operating concept allows for the simple and flexible control of all functions by the surgical team.Almost unlimited LED life expectancy delivers tremendous product reliability and investment protection. Environmentally proactive: low power consumptionn and durable LEDs minimize the impact on our precious resources.
Main Tech Data
| Quantity of LEDS | 80 |
| Color temperature | 3500±300K,4000±300K, 4500±300K,5000±300K |
| Color rendering index | Ra>95 |
| Depth of illumination (mm) | 1000 |
| Spot diameter | 120-250mm |
| LED Life | >50,000 Hours |
| otal LED bulb quantity | 112 pcs |
| Green ENDO | yes |
| Dimming type | Analog dimming |
| Power supply voltage | AC110-240v,50/60Hz |
Mounted steps
1. according to picture 1 and picture 2 in the operation instruction, drill four 16mm holes on the floor plate
with impact drill in determined place. pressure plate and mounting disk must be tightened with screw
M12 in the appropriate length ,according to picture 3.
2. According to mounted diagram, connect the rotating arm to the mounting plate, regulate it to horizontal
place, and tighten it according to picture 3.
3. Connect two balance arms to rotating arms respectively, and connect the conductive plug. then tighten
the two parts with the distributive screw.
4. According to the instruction for the balance arm of Ondal, link the conductive plug, connect two lamps
to the balance arms respectively, and make sure that it is reliable.
5. After careful examination and confirmation, debug the equipment with energizing according to the
operation instruction.
Contact Person: Ms. Huihua Shao
Tel: +86-13764286262
Fax: 86-21-58085105
